We work in order to have constant innovations. Today we want to show you our NEW THERMOSTATIC STEAM TRAPS!

Excellent for extracting saturated or super-heated medium or low-pressure steam condensates.

Thermostatic traps application

Applicable to steam piping, irons, laundries, vessels with condensate discharge, cooking pots, sterilizers, heat exchangers, multiple dish presses, vulcanizing autoclaves, calenders, pressure reducing equipment, etc.

Thermostatic traps specifications

  • Operates via a thermostatic valve that opens the way to cold air and water and condensates but closes in the presence of condensates at vaporization stage.
  • Made entirely of stainless steel due to its wear, temperature and corrosion resistance. Fully recyclable.
  • Long life cycle with high operating efficiency.
  • Very simple three-part design which enables easier and faster maintenance compared to other similar steam traps.
  • Simple to install, can be mounted in any position.
  • Compact, robust. Much smaller and lighter than conventional steam traps.
  • Interior body designed for the required capacities in each case, thus avoiding over-dimensioning.
  • Service conditions and flow direction markings on steam trap body.
  • Continuous discharge.
  • Also ideal for air elimination.
  • Precise opening and closing, preventing steam losses.
  • Totally silent.
  • Insensitive to vibration, water hammers, reheated steam, corrosive condensate, freeze, etc.
  • Protective shut-off surface filter designed to work at the same rate all over the surface. Simple and fast access to filter.
  • Treated closing surfaces, which are grinded, lapped and burnished in order to achieve a degree of water-tightness that even exceeds EN 12266-1 requirements.
  • All steam traps are rigorously tested and verified.
  • Each component is numbered, registered and monitored. If previously requested, all the material, castings, tests and performances certificates will be delivered with the steam trap.
  • Mod. 444 with reduced assembly length in accordance with EN-558, basic series 49. Steam trap is provided with one single centering ring in accordance with the following standards: EN, DIN and UNE (PN-6, 10, 16, 25, and 40), ASA (ANSI) (PSI-150 [except for DN-15], 300) and others (NF, BS, etc.).

Discover more about them here