Thermodynamic steam trap without filter
Mod. 041 EN
Mod. 042 EN
> Mod. 041 EN
Thermodynamic steam traps without filter for the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, etc.
Fabrication program
Catalogues by product
Operating principles
Assembly and disassembly instructions
Categorisation C Є
> Mod. 042 EN
Thermodynamic steam traps without filter for the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, etc.
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions
Categorisation C Є
Thermodynamic steam trap with filter
Mod. 043
Mod. 044
> Mod. 043
Thermodynamic steam trap with filter for the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, etc
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions
Categorisation C Є
> Mod. 044
Thermodynamic steam trap with for the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, etc
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions
Categorisation C Є
Bimetallic steam trap
Mod. 143 EN ASME/FNTP ASME/SW
Mod. 144 EN ASME/ANSI
> Mod. 143 EN ASME/FNPT ASME/SW
Bimetallic steam trap for the extraction of steam condensates. Applicable in: steam piping, heat exchangers, chemical and petrochemical industries,… etc.
Fabrication programCatalogues by product
Operating principles AP BP MP
Assembly and disassembly instructions AP BP MP
Complementary technical instructions
Categorisation C Є
> Mod. 144 EN ASME/ANSI
Bimetallic steam trap for the extraction of steam condensates. Applicable in: steam piping, heat exchangers, chemical and petrochemical industries,… etc.
Fabrication programCatalogues by product
Operating principles AP BP MP
Assembly and disassembly instructions AP BP MP
Complementary technical instructions
Categorisation C Є
Inverted bucket steam trap
Mod. 343 EN ASME/FNPT
> Mod. 343 EN ASME/FNPT
Inverted bucket steam trap to extract saturated or super-heated lowpressure steam condensates. Applicable to: steam piping, heat exchangers, plants with automatic temperature control, etc., in the chemical and petrochemical industries,etc.
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions
Complementary technical instructions
Categorisation C Є
Float and thermostatic steam trap
Mod. 241 EN ASME/FNTP
Mod. 243 EN ASME/FNPT ASME/SW
Mod. 244 EN ASME/ANSI
> Mod. 241 EN ASME/FNPT
Float and thermostatic steam trap to extract saturated or super-heated medium or lowpressure steam condensates. Applicable to: steam piping, heat exchangers, plants with automatic temperature control, etc., in the chemical and petrochemical industries, etc.
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions
Complementary technical instructions
Categorisation C Є
> Mod. 243 EN ASME/FNPT ASME/SW
Float and thermostatic steam trap to extract saturated or super-heated medium or lowpressure steam condensates. Applicable to: steam piping, heat exchangers, plants with automatic temperature control, etc., in the chemical and petrochemical industries, etc.
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions R11 2 R1 2
Complementary technical instructions
Categorisation C Є
> Mod. 244 EN ASME/ANSI
Float and thermostatic steam trap to extract saturated or super-heated medium or lowpressure steam condensates. Applicable to: steam piping, heat exchangers, plants with automatic temperature control, etc., in the chemical and petrochemical industries, etc.
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions DN15-DN20-DN25 DN40-DN50
Complementary technical instructions
Categorisation C Є
Thermostatic steam trap
Mod. 443 EN ASME/FNTP ASME/SW
Mod. 444 EN ASME/ANSI
Mod. 543 EN ASME/FNPT
> Mod. 443 EN ASME/FNPT ASME/SW
Thermostatic steam trap to extract saturated or super-heated medium or low-pressure steam condensates. Applicable to: steam piping, irons, laundries, vessels with condensate discharge, cooking pots, sterilizers, heat exchangers, multiple dish presses, vulcanizing autoclaves, calenders, pressure reducing equipment, etc.
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions
Categorisation C Є
> Mod. 444 EN ASME/ANSI
Thermostatic steam trap to extract saturated or super-heated medium or low-pressure steam condensates. Applicable to: steam piping, irons, laundries, vessels with condensate discharge, cooking pots, sterilizers, heat exchangers, multiple dish presses, vulcanizing autoclaves, calenders, pressure reducing equipment, etc.
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions
Categorisation C Є
> Mod. 543 EN ASME/FNPT
Thermostatic steam trap to extract saturated or super-heated medium or low-pressure steam condensates. Applicable to: steam piping, irons, laundries, vessels with condensate discharge, cooking pots, sterilizers, heat exchangers, multiple dish presses, vulcanizing autoclaves, calenders, pressure reducing equipment, etc.
Fabrication programCatalogues by product
Operating principles
Assembly and disassembly instructions
Categorisation C Є
Ultrasonic leak detector
Mod. 003
> Mod. 003
To detect leaks: In condensate purgers. In valve seals. Checking for wear on bearings. Solving mechanical problems in general. Ultrasound is directional and localisable. In a noisy environment we can remove or block the distorting ultrasounds. During preventive maintenance, we should place the stethoscope properly and we will detect, audibly and visually, the leaks that are aff ecting us. We can take corrective action, safeguarding the environment, saving energy, time and consequently money. It meets and exceeds the requirements of ASTM E1002-2005 for Leak Detection.
Fabrication programCatalogues by product
Complementary technical instructions
Categorisation C Є
